Connection to the power grid
To connect the KS0 version to the network, a power supply with a minimum power of 65W should be included in the package. If you bought the mining machine (Asic) from us, then it is already in the package 😊 As with any other device, first connect the power supply to the socket and then to the mining machine itself. To connect KS2, KS1, a standard computer cable will suffice, which we always add as a small gift for free. Since the KS1 has a power of 600 watts and the KS2 1200 watts, you don't have to worry too much about whether the mains will last. Classically, 3680 watts per fuse is calculated for one or two sockets. KS3, KS3L already has a power of 3200 watts and this is almost at the limit of the maximum network load per fuse. Here you should approach this question more carefully.
How to find an Asic on the network so I can connect to it and set up a pool and wallet.
In order for us to find the Asic on the network, you must be connected on the same network as the Asic. The official software from iceriver will help us find the IP address, which you can download from the link – odkaz. After starting the program, select the IP Detected option, allow access, an empty table will appear, if your Asic has been working for at least two minutes, press the IP button on the Asic. After that, the IP address of the Asic should appear in the table. Enter this IP address in the browser, for example – 192.168.1.124.
Login and password for Asic Iceriver KS1 KS2 KS3 KS3L
The login and password are different from standard access, as is the case with Bitmain. At Iceriver
Login name: admin
Password: 12345678
You can change this information at any time.
Pool settings for Asic Iceriver KS0 KS1 KS2 KS3 KS3L
Go to Asic – Mining Setting menu, below you can copy data from 2miners pool.
IceRiver KAS KS0 Settings: URL: stratum+tcp://kas.2miners.com:2020
Worker: YOUR_WALLET_ADDRESS
Password: x
Settings IceRiver KAS KS1, IceRiver KAS KS2: URL: stratum+tcp://kas.2miners.com:2222
Worker: YOUR_WALLET_ADDRESS
Password: x
After entering all the data, do not forget to press the Save button. After saving, just to be sure, restart the Asic in this menu using the Restart button to be 100% sure that the data you entered was accepted by the Asic. Everything is ready, we are waiting for Asic to start mining and we are watching the statistics in the pool. https://2miners.com/ – On the pool pages above, enter your wallet to view stats.